SkySimFlight
Pilot Area => The Chat Room => Topic started by: NoiZ on February 18, 2012, 20:54:35
-
Hello Pilots of SSF, i would like to announce that the painters from SKA and PIA have made an agreement with the manufacturer of Airbus and Boeing to use their Paintshops.
This provides us the option to paint for VA´s who dont have own painters at this time. We will keep this in a trial periode to see how the orders roll in and if it hits the spot then
we will continue to provide this service. The places to get your aircraft been painted are EDHI (Airbus) and KPAE (Boeing) but you also can take any aircraft type to where it is closer
to your location. As we are in progress of other projects we ask you to be patient once you made an order. We will always keep you updated and reply latest news on this topic.
The prices for the aircraft paints are:
Commercial Jets up to 747 - 1.500.000 SSF Coins
Commercial Jets like 747 or bigger - 3.000.000 SSF Coins
Commercial Props (depends on size) - 100.000 to 550.000 SSF Coins
There is the chance of special offers on multiple orders, this will be handled on Teamspeak personaly.
All orders have to be paid in full before rollout, in case the VA is unable to pay the actual order will be canceled.
It is recommended that you provide us the information about the publisher of the aircraft so we make sure to get the paintkit. (CLS,LevelD,PMDG,SMS Overland,Carenado...etc)
In case we cant make sure to get this informations we wont accept orders.
The delivery of the paint doesn't contain the paintkit we used to make the paint, you only recieve the flyable textures for your addon, before rollout screenshots will be posted on this topic.
Special liverys are possible when the needed layout is present (idea or graphic).
We do not paint on default FS9 / FSX.
If you have any questions then dont hesitate to ask here.
(The content of the above written informations can be changed anytime so please check back for any updates)
Greets from Aviation Paint Corp.
-
Ill order 1 X 747-400 Overland
1 X 380-800 Overland
-
Hi,
I would like to order one for the PMDG NGX 737-900 WL and one for the PMDG 744.
I still have som problems (delays) with an external repainter. ::)
It should be like the current one, with a minor change at the tail.
More details I can give you over pm or TS.
But I have no experience in repainting and can't provide you with a paintkit or what programmes to use.
Greets
Tom
:)
-
No problems Tom130 we are both experienced with the paint program side and the PMDG 739/747 is no problem to paint on, obtaining paintkit is also no problem we will contact you to discuss your scheme at somepoint. ;D
Collegeroad
Please State Flight Sim Version as some paintkits like PMDG are NGX or standard depending FSX/FS9
-
Hi Collage
Do you remember seeing the Newcastle Brown Livery for the 738 when James was CEO ? If you do I would like the PMDG 739 With that livery. If you Don't remember then I have a few ideas, I will speak with you on Team Speak .
CD261 CEO LINK
-
Hi,
I would like to order one for the PMDG NGX 737-900 WL and one for the PMDG 744.
I still have som problems (delays) with an external repainter. ::)
It should be like the current one, with a minor change at the tail.
More details I can give you over pm or TS.
But I have no experience in repainting and can't provide you with a paintkit or what programmes to use.
Greets
Tom
:)
Hi Tom,
please contact College or me by pm / TS for a view informations we need.
greets Mike
-
Thanks a lot. :) ;)
-
Thats looking so nice Mike thanks
-
Tom130,
Here are the pictures for your approval with the dark line going up into the tail and the winglets redone with Fly Evo and new Fuse Logo in same style text and new engine scheme, just confirm if you approve this. ;D Aircraft Registration to follow. Just need to decide on Tail Logo
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/Evo.jpg)
(Click To Enlarge)
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/Evo1-1.jpg)
(Click To Enlarge)
-
Pic 1. :)
Further information I have sent in two pm's.
Tom
-
Hi Tom,
Below is the adjustments the logo on fuse 50% smaller and re positioned, Evo on tail logo same size as fuse.
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/EvoBloodyVersion3.jpg)
(Click To Enlarge)
-
OK, so far so good. :)
Can you reduce the font size a little more? So that the left F and the right n is not touching the doors anymore and getting a little distance.
The rest is perfect.
Tom
-
This is the final version in my eyes:
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/EvoBloodyStrangleVersion4.jpg)
(Click To Enlarge)
-
Version ??
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/EvoVersion6.jpg)
(Click To Enlarge)
Make Adjustments to Text Moved Closer To Windows.
-
Thanks, now it's fine and ready. :) :)
-
739 is Below for your approval I hope you like or awiting list of adjustments ;D, the curve cannot go any higher as dont forget it's a smaller aircraft and would'nt look right.
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/Evo739.jpg)
(Click To Enlarge)
-
I only want that it looks perfect, I will use the repaints at many places, banners, logos, homepage, evo forum and so on... ;)
Yes, I know it, the 739 is smaller. The tail logo looks nice, but I better don't ask for the...
OK, please reduce the font size a little and move the 'Fly Evolution' to the right (in direction of the tail) that the 'F' is above the single window.
Second:
The blue should 'meet' the blue at the tail (picture on the right).
(http://www10.pic-upload.de/23.02.12/iy39s2wf6ep.jpg)
The rest is perfect. :)
-
Text Moved as requested and curve is now inline with the tail.
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/Evo739V1.jpg)
(Click Image To Enlarge)
-
Perfect. :) :)
Now I must travel to KAPE for the handover... ;pty2
-
I don't have KAPE in my navdata. I am not sure, is KBFI the new ICAO?
-
I don't have KAPE in my navdata. I am not sure, is KBFI the new ICAO?
KBFI Boeing Field/King County International Airport
Seattle, Washington, USA
-
Tom The ICAO is "KPAE" , Everett/Snohomish Co
-
A route finder in the web did not have it, strange.
I have checked some others and additional the PMDG navdata file, it is in.
But I am wondering. For example, if an airline gets the aircraft with a paint at KPAE, how do they bring it e.g. to PHNL?
Now I must fly several steps, the 739ER has a limited range. I hope nobody must fly there with a Cessna.... :) ::)
-
A route finder in the web did not have it, strange.
I have checked some others and additional the PMDG navdata file, it is in.
But I am wondering. For example, if an airline gets the aircraft with a paint at KPAE, how do they bring it e.g. to PHNL?
Now I must fly several steps, the 739ER has a limited range. I hope nobody must fly there with a Cessna.... :) ::)
To end this conversation we make it quick, thoose who want to make it proper go to the airports we posted to pickup the aircrafts, it dont mean that you need to take a Boeing to KPAE
you also could fly it to EDHI like Smithy did with his 744 to repaint.
But we also can deliver them into the living room thats fine for us after the little changes what have been made again and again, want a coffee as well?
Please contact College for the package of the paints and send in a ticket for the transfer of the payment.
Regards Mike
-
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/744FMC.png)
744 route from EDDF to KPAE :-\ ;pty4
-
A route finder in the web did not have it, strange.
I have checked some others and additional the PMDG navdata file, it is in.
It is in the navdata of the PMDG. It only was not in a routefinder in the web. ::) Read my post more exactly.
I will fly there with the PMDG, send a support ticket and contact Collegeroad. I am old, but I understand it. ::)
It was a misunderstood that I must not take the exact aircraft. Sorry.
Something else to make me laughable, like in the last two posts???
-
not yet, will think about some good ;pty4 )pty1 ;pty5 ;pty2
-
All Asian Pax ATR72-500
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianPax.jpg)
(Click To Enlarge)
All Asian Cargo ATR72-500
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAACargo.jpg)
(Click To Enlarge)
-
All Asian Pax ATR72-500
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianPax.jpg) Can i have the word "Limasawa Island" placed on the pax plane.
(Click To Enlarge)
All Asian Cargo ATR72-500
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAACargo.jpg) Can this be chnaged to "All Asian Airlines" with the "cargo" Under it as you have it now.
(Click To Enlarge)
-
Done As Requested Airlines Added to Cargo Version and Limasawa Island added to Pax version see below:
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianC.jpg)
(Click To Enlarge)
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianP.jpg)
(Click To Enlarge)
-
Version 2 of each
Cargo
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianC2.jpg)
(Click To Enlarge)
Pax
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianP1.jpg)
(Click To Enlarge)
-
That will do they look nice, Collegeroad
The Limasawa the size you have it now in this image.
http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AllAsianP2.jpg
The 2 paints are to be clean no dirt on then and after you have done that they should be fine.
Tickets in for the payment for the 2
-
All Asian Cargo and Passenger Version Factory Fresh on the way to the client.
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAA-PAX.jpg)
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAA_Cargo.jpg)
-
Has the Aviation Paint Corp shut its doors ? Got orders in yet no paints
-
as you may noticed College is on vacation and i wasnt around for couple days.
-
"Absolute perfection takes time" - unknown
-
Quite rightly as Noiz says I away for 2 weeks and just got back, if Avaiation Corp was to cease myself and Mike would have made a statement and I did'nt realise I had to request my holiday :P
Patience is a Virtue
and Rome wasn't built in a day ;D
-
I would like to order 1 Captain Sim 777 tail reg G-YMMU
-
Hey just came up woth an idea and id like this repaint for JUL in a 757 thanks!
(http://i608.photobucket.com/albums/tt164/bobplog123bo/QW752-Fuselage-Master-1.jpg)
-
Beautiful job Brendan! It turned out very nicely. Cant wait to see some pics of you flying it.
-
thanks a lot pat im still working on a second version
-
Hey Guys id like you to make a 757-200 of this paint for JUL its the final copy so good luck !
(http://i608.photobucket.com/albums/tt164/bobplog123bo/QW752-Fuselage-Master-2.jpg)
-
Hey, try to post some pics of you flying those liveries or at a terminal of some sort to see how it looks in the sim with shine and such on the aircraft.
-
defiantly
-
After a short break the Aviation Corp got back to work and completed 2 paints for approval from All Asian Airlines:
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAAA321.jpg)
Airbus A321 (Click To Enlarge)
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAVersion3.jpg)
Boeing 737-800 (Click To Enlarge)
-
The 738 tail paint/chrome dont look right. well not the same as the A321 ? and up the top can that be fixed ?
Flag on the 738 is the wrong way.
(http://img189.imageshack.us/img189/1647/aaversion3a.jpg) (http://img189.imageshack.us/i/aaversion3a.jpg/)
-
due to naff PMDG 738 paintkit the top cannot be fixed, made it right on the kit but once it went into FSX it was changed I will try and get chrome so it sweeps further back and redo flag but the top will never look right.
-
If you can place the model of the planes on them/ boeing 737-800, airbus 321-200 logo,s on them ill take them when ready
-
two All Asian Airline paints awaiting approval below:
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAAA321v5.jpg)
(http://i72.photobucket.com/albums/i169/Pedro_mustard/Aviation%20Corp/AAA773V7.jpg)
-
looks good to me mike
-
Can i have the A380 using the Project Airbus A380 red and chrome for now. Lots of problems with my overland.
-
Sorry to say no, as we already have the layout done on the SMS A380 and there is no way to start from the scratch with all the work on a PA A380.
The problems you have on the SMS A380 are not paint related so can be fixed by getting a working SMS A380. If you dont want to keep the order please let us know.
Greets Mike
-
let me know when its ready, ill fly it without wings
-
Strange that the package i sended to you with all the different paints worked for such a long time and now it hasnt any wings left. you mussed have paid them OFF...
hold on i just call my lawyer to see if i can get rid of the APC.
Mike
-
I'll A pic later of the problem I'm getting only with my A380
-
Fixed the the rudder stays still while the elevator and ailerons that just droop. had to turn my lights on ;pty4
-
On most SMS you have to turn the lights on before it went normal as this would be like in real world 1st lights then the rest. For me it was always like this maybe College can agree.
greets Mike
-
Yes I found it the same as Mike
-
APC Closed
Regards Mike